Pay in installments of $5.45 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 2 - Jul 7
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
trak racer inverted pedal mount Universal TR-One Pedal Mounting System including Mounting Profile and Heel RestTR One Adjustable Gen2 Pedal Mounting System including Mounting Profile and Heel Rest with Micro Adjustment Slide Function Trak Racer is the Official Simulator Supplier of Alpine F1 Team and Partner of Airbus Aircraft. What is TR One? TR One is a new range of products from Trak Racer that can be updated by only needing a single part and not the entire mount. TR One Pedals all share the same side plates, TR One Wheel Mounts all share the same base kit
TR-One Adjustable Gen2 Pedal Mounting System including Mounting Profile and Heel Rest with Micro-Adjustment Slide Function
Trak Racer is the Official Simulator Supplier of Alpine F1 Team and Partner of Airbus Aircraft.
What is TR-One? TR-One is a new range of products from Trak Racer that can be updated by only needing a single part and not the entire mount.
TR-One Pedals all share the same side plates, TR-One Wheel Mounts all share the same base kit and TR-One Shifter System allows 'piggy-backing' of new mounts to the TR-One Gen 2 Shifter Mount. The benefit is lower cost and never having an outdated mount again.
The Trak Racer Gen2 Pedal Mount can be mounted to sit above or below the chassis and allows mounting of most high-end pedal systems due to its infinite adjustment. The clever design mounts inside the chassis for ground-level height or outside the chassis for above chassis height.
The pedal baseplate is made out of a high-quality aluminum profile and includes a bonus heel rest.
The pedal is constructed from:
- 2 x Aluminium Side Plates
- 1 x Heel Rest
- 2 x 40x40 Profile
- 1 x 80x40 Profile
Adjustable Pedal Mount Features:
- Unique Bracket Design allows you to position the pedal plate above, or below the top of the chassis
- Hassle-Free Angle Adjustment with the Tool-free screw
- Fully adjustable bracket for both angle, height, and slide
- Thick, no-flex Aluminium side plates
- Adjustable position of heel rest and aluminum profile for mounting of high-end pedals
Pedal Deck Compatibility:
| Asetek La Prima, Forte, Invicta, Invicta T.H.O.R.P. II & Initium pedals | AW Prime Pedals Set |
| BJ Sim Racing Steel Series, 1000psi Hydraulic | Cammus LC100 Pedals (2024) |
| Conspit CPP & CPP.LITE Pedals | Cube Controls Hydraulic SP01 |
| DC Sim Racing DC3 | Fanatec CSL Elite Pedals, ClubSport V1/V2/V3 (including Inverted Pedals) |
| Ghost Sim Racing Phantom-PRO Pedals (2023–25) | HPP PRX 3P, JBV 2/3 Pedal System |
| Heusinkveld Ultimate/Ultimate+, Sprint and Pro | JCL Hydraulic Pedals |
| Logitech G25, G27, G29, G920, G923, G Pro pedals | Meca Cup1-2, Meca Cup1-3, Clutch and Base Plate, Meca Cup 1 Evo Hydraulic & LC |
| Moza CRP, SRP Pedal set with and without SRP plate & Moza ActivePedal | OBP Pro Race V2 Sim Pedal System |
| Protosimtech PT2 | Quaife Throttle Pedal and Brake |
| Racewerk S1 Hydraulic Sim Racing Pedals | Ricmotech RealGear GTPRO3 Pedals |
| SRP GT/GT-R/Formula/Formula-R | Simagic P2000, P1000 (All variants) & P500 Pedals |
| Simucube Active pedals | Simworx Pro Series |
| Simgrade pedal plate and VX PEDAL | Sim Coaches P1-3 |
| Simtrecs ProPedal GT (2023) | SimJack Pro Pedals, SimJack Ultimate UT Pedals |
| Simforge Mark-2 Pedals, Simforge Mark-1 | Sim-Lab XP1 Pedals (2024) |
| Simtag PT-1 Modular Pedals | Trak Racer Loadcell Pro Pedals |
| Thera Pedals | Turtle Beach Velocity One Race pedals |
| Thrustmaster T-LCM, T3PA, GT Ed, T3PGT, T3PA PRO add-on and T500, T150 pedals | Velazquez Engineering PRO+ Hydraulic |
| Venym ATRAX Black Pedals (2024) | VRS DirectForce Pro Pedals |
| VNM V1 Pedals | Wave Impetus |
| XP1 Loadcell Pedal Set | 3DRAP Ngasa |
| Contact us if your product is not listed | |
| Also, Flight/Heavy Equipment | |
| Thrustmaster TPR: Thrustmaster Pendular Rudder | Logitech Heavy Equipment |
| Thrustmaster T.Flight Rudder Pedals | Virpil Ace |
| Logitech Flight Rudder Pedals | Flight Sim Rudder Pedals – RUDDO+ (2 holes only on pedal pre-drilled plate) |
| Contact us if your product is not listed | |
5 Year Warranty
Official Racing Simulator of Alpine F1 Team and Partner of Airbus Aircraft
Since 2008, Trak Racer has been favored by professional drivers/pilots, game centers, massive gaming events, and event hire companies. By offering the highest quality gear in the industry, Trak Racer has collaborated with big-name brands such as, but not limited to, Alpine F1, Airbus, Xbox, Ubisoft, Sony, Castrol, Accord Hotels, and more.
If you're looking to partner with Trak Racer please get in touch.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 1067 reviews
Sort
Product Reviews
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
True to Description
Color: Black, Size: 4 Panel
Love it!! I bought it for privacy while the nurse is dressing my dad. There were several colors black matched the decor . It blocked the sunlight and street lights. Durability and quality very good. Easy closure when not in use. Lightweight. No assembly needed
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 5
Nice room divider!
Color: White, Size: 8 Panel
The white panels are a nice off-white color. shipped in perfect condition. Already assembled so set up was quick. We use them to separate a photo studio from the main entry. Easily covers a 6 Ft. opening to the room. They are a woven material with wood colored sticks to support the weave. They are about 6 Ft. tall at the top of the curved section but less at the hinged sections. Light and easy to set up and take down. We are straddling two different floors so the extended legs at the bottom make this easy. Not sure how to clean them but they look great so far!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 21, 2025
★★★★★ 5
Instant Privacy
Color: Beige, Size: 8 Panel
Bought this to separate a ground level living area used as an office. Works well to cover visual clutter; allows a clean look when entering the front door. Comes fully assembled. Hinges are sturdy enough, as long as the panels aren’t stretched too far; have to allow some bend between them. For the price point, quality and functionality are satisfactory.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 22, 2025
★★★★★ 4
Great Divider, Just Needed Anchoring for Outdoor Use
Color: Grey, Size: 6 Panel
This room divider is very nice—stylish, lightweight, and easy to set up. I’m using it outdoors, which may not be its intended use, and I found that wind can knock it over pretty easily. Once I anchored it down, though, it worked just fine and looks great in the space. Indoors, I imagine it would be perfect right out of the box. Overall, a solid purchase with just one small adjustment needed for my setup.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 2, 2025
recommand products
Aufbewahrungsbehälter aus durchsichtigem Kunststoff mit 36 Fächern – Falentia
25.19
SoBuy | Bücherregal mit Schubladen | Aufbewahrungsregal
28.08
Bulls Iconic Evo TR1 E-Bike Generalüberholt aus zweiter Hand E-Bike – H&B Exclusive
23.96
Loop – das flexible erweiterbare Schalregal kaufen – corpus delicti design Hamburg – Wir machen Geschenke
23.69
ne Touch Fresh® – Vorratsbehälter mit Einhandbedienung von Tupperware® – myTupp
20.33